FAQ

Straight answers about LPG systems.

Understand how LPG supply, reticulation, storage, servicing, and emergency response fit together before work starts.

The essentials

Questions clients ask before work starts.

The right gas system starts with clear information. These answers cover the practical decisions that matter from specification through to ongoing support.

Understanding LPG systems

What is gas reticulation?

Gas reticulation is a coordinated system that distributes gas from a central storage arrangement to multiple appliances or points of use through fixed pipework. In an LPG installation, it typically includes a bulk tank or cylinder arrangement, regulators, isolation valves, safety equipment, and pipework serving kitchens, fireplaces, or other appliances. The system is designed, tested, documented, and handed over for the specific property; it is not simply a matter of connecting a tank to a building.

What is LPG, and how does an LPG reticulation system work?

LPG, or Liquefied Petroleum Gas, is stored as a liquid under pressure and becomes a gas when released for use. An LPG reticulation system brings that supply into one coordinated building system: a bulk tank, regulators, isolation and safety equipment, and a network of permanently installed pipes deliver gas to the required appliances. The system is sized for the building, pressure-tested, documented, and handed over with operating guidance.

What is the difference between bulk LPG supply and cylinder supply?

Bulk supply stores LPG in a larger, fixed tank and replenishes it through planned deliveries. Cylinder supply uses individual portable cylinders that are changed or refilled for each home or point of use. A centralised bulk system can reduce repeated cylinder handling and keep storage, pipework, regulators, and isolation points under one coordinated design. The right option depends on demand, available space, access for delivery, and the needs of the project; both options require correct installation, storage, and servicing.

What are the benefits of LPG reticulation for a development?

A well-designed reticulated system gives a development one coordinated gas infrastructure solution instead of a collection of disconnected cylinder arrangements. It can keep cylinders out of living spaces and service areas, make isolation points easier to identify, and give facilities teams a clearer route for inspection, maintenance, and accountability. Developers can also coordinate the tank location, ventilation, pipe routes, appliances, and safety controls from the start. These benefits depend on correct design, installation, testing, and ongoing care.

Supply and storage

How do I know when a bulk LPG tank needs refilling?

A bulk tank has a level gauge that gives the facilities or maintenance team a clear indication of the remaining supply. The gauge should be checked as part of an agreed monitoring and replenishment routine rather than waiting until the tank is empty. Your supply or maintenance arrangement should define who checks the level, who orders the delivery, and how access is coordinated. Tank readings are an operational guide, so any unusual change in level or supply should be investigated by a competent gas professional.

How should LPG tanks and cylinders be stored?

LPG tanks and cylinders should be kept in an appropriate, well-ventilated outdoor location on a stable base, protected from damage and unauthorised interference. Cylinders should remain upright and both tanks and cylinders must be kept away from flames, ignition sources, excessive heat, drains, and low-lying or enclosed spaces where gas could collect. Do not store cylinders inside living areas. Final locations, clearances, access, and protection must follow the equipment instructions and the requirements that apply to the project.

Care and performance

How often should an LPG system be serviced?

There is no single interval that suits every LPG system. Servicing should follow the equipment manufacturer’s instructions, the system’s commissioning and handover requirements, how heavily it is used, and the requirements that apply to the installation. Planned inspections should cover the tank or cylinders, regulators, valves, pipework, appliances, ventilation, and leak-detection equipment where fitted. Arrange an inspection after any alteration, damage, unusual smell, or suspected fault, and use a competent gas contractor for testing and repairs.

Is LPG environmentally better than other fuels?

LPG can produce fewer local particulates and sulfur emissions than some solid or heavier fuels when it is correctly stored and combusted, which can support cleaner air at the point of use. It is still a fossil fuel and is not a zero-carbon solution. Its overall environmental impact depends on the source, transport, system efficiency, leakage control, and what fuel it replaces. We recommend treating environmental performance as part of the design conversation, not as a blanket claim that LPG is better in every situation.

Safety and emergencies

What should I do if I smell gas or suspect a leak?

If it is safe to do so, shut off the nearest isolation valve or the cylinder or tank supply. Do not operate electrical switches, start vehicles, use a flame, smoke, or use anything that could create a spark in the affected area. Open doors and windows for ventilation only if you can do so without creating a risk, then evacuate everyone to fresh air and keep people away. Do not re-enter to look for the leak. For immediate danger, contact local emergency services; once you are safe, contact Continental Experts on +254 721 321 214 or +254 777 321 220 for system support.

What should I do in a gas emergency?

Treat a fire, major leak, explosion risk, or anyone feeling unwell as an emergency. Warn others only if you can do so without entering the danger area, evacuate to a safe distance, and avoid flames, electrical switches, phones, and vehicles near the suspected leak. Call local emergency services when there is an immediate risk to people or property, and do not return until the area has been declared safe. After evacuation, contact Continental Experts on +254 721 321 214 or +254 777 321 220 so the system can be assessed and the next steps coordinated.

Need a project-specific answer?

Let’s talk through your system.

Every building has different demand, access, equipment, and handover requirements. We can review the scope and explain the right next step.